Blinds are versatile and can be installed inside or outside the window recess.When measuring for outside mount blinds of the window to add an additional 2-6 inches across and 3 inches in height to provide adequate coverage window.
Place the ladder in the center of the window. Measure the total length of the head rail of the blind and add 1/8 inch to the measured length. Hold the mounting bracket in the orientation described in the assembly instructions to the outer corner of the mounting bracket that sits in the corner in which he scored the perpendicular lines at the corners of the windows. Mark two diagonals through the mounting holes on the wall in both corners of the window. Drill hole size recommended in each hole pencil marking. Outside mount blinds the brackets to the wall with screws wood supplies. Level the media before fully tightening the screws. Slide the head rail mounting brackets and insert the retaining clips to hold the rail-head in place. Partially lower the blinds to allow easy access to the rail head. Place the valance clips to the rail head and slide the valance in place. Place the chopped valance return to the valance to complete the installation outside mount blinds. Slide the control rod in the hook of the rail head.